WALL AND CEILING
STANDARDS
- Introduction, Preface and Sustainable Design, LEED / Green Building
- Scope of Manual and Metric Guide
- Section 9.1 – Lathing and Metal Furring
- Section 9.2 – Interior Steel Studs and Furring
- Section 9.3 – Wind Load Bearing Steel Studs
- Section 9.4 – Axial Load Bearing
- Section 9.5 – Gypsum Board
- Section 9.6 – Gypsum Shaftwall Systems
- Section 9.7 – Sprayed Textured Finish
- Section 9.8 – Interior Plastering
- Section 9.9 – Stucco
- Section 9.10 – Exterior Insulation and Finish Systems
- Section 9.11 – Acrylic Stucco Finish
- Section 9.12 – Acoustical Ceilings
- Section 9.13 – Acoustical Wall and Ceiling Panels
- Section 9.14 – Metal Ceiling Systems
- Section 9.15 – Wood Panel / Linear Wood Ceilings
- Section 9.16 – Glass Fibre Reinforced Cement Section (GRC)
- Section 9.17 – Glass Fibre Reinforced Gypsum (GRG)
- Section 9.18 – Access Floor Systems
- Section 9.19 – Sprayed Fireproofing
- Section 9.20 – Thermal and Acoustical Insulation
- Fire and Sound Ratings
- Quality Assurance Procedures
- References and Standards
- Glossary of Terms and Definitions Literature
- Gypsum Association Fire Resistance Design Manual
|
|
